VLAN Group Settings

To create a VLAN Group:
  1. Go to Configure > Policy > VLAN Groups.
  2. Click Add.
  3. Configure the following parameters:
    Name
    Group name.
    Mode
    • Bridged@AC topologies using AP39xx access points are supported.
    Note

    Note

    You cannot modify the group mode after the group is created.
    VLAN ID
    ID for the VLAN Group
    VLANs
    List of configured VLANs that can be added to the group. Select a VLAN from the list and click the plus sign to add the VLAN to the group.
  4. Click Save.
9038996-00 Rev. AB